![]() If you've read this far, you may be interested in the older version of this tool which does not attempt to adapt to the sound and also includes more diagnostic information. The volume threshold is the value (0-255) which the measured volume in the analysed frequency must exceed to be counted as a dit or dah. The volume filter (which uses dB) discards very quiet (very negative) or very loud (close to zero) sounds and scales the size of the remaining data. There are three parameters which are not automatic: the minimum and maximum volume filter settings and the volume threshold setting. The frequency can only be certain values and the closest allowed value will be chosen. If you want to fix the frequency or speed then click on the "Manual" checkboxes and type in your chosen values. With an Arduino, an LCD module and a few components you can have your own pocket-sized 'secret decoder' that will do up to 80 wpm, enabling even you the 'noob' to dive feet first into the CW bands with an electronic set of 'swimmies' While there are quite a few standalone Morse Code or CW decoders out there, I wanted to tackle the problem. ![]() In fully automatic mode, the decoder selects the loudest frequency and adjusts the Morse code speed to fit the data. From these timings it determines if something is a dit, dah, or a sort of space and then converts it into a letter shown in the message box. If the volume in the chosen frequency is louder than the "Volume threshold" then it is treated as being part of a dit or dah, and otherwise it records a gap (this is shown in the lower graph that looks like a barcode). The spectrogram of the sound is shown in the main graph along with a pink region showing the frequency being analysed. The Morse code is audible and a sample audio is uploaded to the GITHUB link. The decoder will analyse sound coming from the microphone or from an audio file. Real-Time Decoding of VOR using RTL-SDR Introduction VHF Omnidirectional Range (VOR) is a subset of Aircraft Navigation technique falling under point source navigation, which also includes Direction Finders, DME and Tacan. HI, has anyone managed to get MRP40 Morse decoder (Non SDR version) to work with the IC-7610 - I can get the software to receive and decode without.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |